Classic puzzle - Burr Puzzles
Burr puzzles are a great way to start puzzling, and you’ve probably seen a classic 6 piece burr, as they’re quite common. A 6 piece burr consists of three pairs of parallel pieces, one on each of the 3 directions (note the threefold symmetry along a corner). There is typically one key piece which can freely slide in and out, and other pieces have various cut outs that fit together in various ways.
More difficult burrs have more interesting first piece removals, and this is generally how they are classified. The number of moves required to remove the first piece, the number of moves required to remove the second piece, etc. etc.
If you look closely at the burrs, you will see that there is a clear pattern involved in their construction. The ends are full squares, but then there is a “grid” of 2x2x4 possible parts that can be removed in each piece, with the standard key piece having nothing removed. Once you understand this, you could build them quite easily with any saw (I recommend a miter block which can be bought for about 10$ if you are just starting) The easiest to make are so called “notchable” burrs, which can be cut easily with such a saw. Next comes pieces which may have just one cube removed since they are a little more difficult, needing to be chiseled out, or made by cutting out more than necessary and gluing others back.
You could also make them by getting any collection of cubes of the same size and gluing them together, although tolerance can easily be an issue. Dice work quite well, though you will need a lot to make burrs from them and they will be heavy. They also superglue together nicely but have a tendency to fall apart after a year or so, so don’t make a long lasting puzzle this way. Live cube or legos offer a nice alternative, although possibly more expensive.
Any combination of cut-outs could be part of a burr, with the obvious necessity of having the two ends be attached. In the easier to make burrs, generally there is one quarter which goes all the way through end two end, but you can easily imagine slightly harder to make pieces which sort of “spiral” around and connect in complicated ways. Rob Stegmann, creator of “Rob’s puzzle page” has created a system for numbering the pieces using binary which you can find here: http://robspuzzlepage.com/interlocking.htm although there are certainly many more systems of classifying burr pieces.
There is also very nice open software, burr tools here http://burrtools.sourceforge.net/ which you can use to solve many many burrs, including variants. Don’t use it to cheat =] It can be very helpful for designing new burrs.
One of the nice things about burrs for beginners is that you can get a collection of burr pieces such as the Universal burr set here https://www.creativecrafthouse.com/ultimate-burr-set-over-60-2x2x2-burrs.html
You can recombine these in many many ways to make many many different puzzles, and in fact there are many more than the sheet which comes with this set tells you, as can be seen here http://www.robspuzzlepage.com/resources/Ultimate_Burr_Set.pdf
You will find many many variants Beyond the classic. You can have 6 pieces in each direction, or more, you can have burrs which fill out to make solid shapes such as cubes or spheres, you can have a different configuration of the pieces such as triangular pieces or hexagonal pieces, or even spheres, and you can add other elements such as rolling balls inside, or gravity pins, or centrifugal force mechanisms. Some very difficult computer designed burrs can be found from binary arts which I’ll post later. They are fun to take apart, but very very difficult to get back together if you aren’t paying attention. I often don’t pay attention on purpose so that I can have a more difficult puzzle putting them back together, but I often end up looking it up so that I can have its res assembled in a reasonable amount of time. With proper deduction it is possible though if you are dedicated enough.
My favorite variant which I actually haven’t played with is Bill Cutler’s Binary Burr. It is actually a base 2 n-ary puzzle like towers of Hanoi, so it can be designed with extra pieces, and each set of extra pieces doubles the number of moves needed to solve it. (Some even multiply by 3,4,5 or more). It is quite easy to design a puzzle like this so that it would require more time than the universe has ever existed to solve, which I find is quite profound.



Comments
Post a Comment